grandMA3 User Manual » XYZ » Activating XYZ for Fixture Types

Version 2.0

XYZ needs to be activated for a fixture type to get access to the XYZ attributes.

	Important:
	Turning On XYZ adds extra virtual parameters for each fixture using the fixture type mode. These extra virtual parameters do not count against the parameter limit, but they are shown in the System Info window.

XYZ is turned on in the Fixture Type Editor.

1. Press Menu.
2. Tap Patch.
3. Tap Fixture Types in the menu on the left.
4. Select the fixture type that needs XYZ.
5. Tap Edit in the menu at the bottom.
6. Select the desired DMX Mode, if there are multiple.
7. Turn On XYZ in the menu at the bottom or edit the cell to say "Yes".
8. Close the editor and the patch and save the changes.

Now XYZ can be used for the selected fixture type mode.

XYZ is activated for the selected fixture type mode. So make sure it is activated for the mode that is used.