grandMA3 User Manual Publication
Capture Keyword
grandMA3 User Manual » Command Syntax and Keywords » General Keywords » Capture
|
Version 2.0
|
To enter the Capture keyword in the command line, use one of the following options:
- Press Stomp Stomp
- Type Capture
- Type the shortcut Cap
Description
The Capture keyword is a command keyword which is used to activate the current output values of specified parameters.
Capturing parameters during a running phaser or cue fade activates the actual values at the moment the command is executed. The result is a single step of static values resembling a freeze frame of the output.
Important: | |
The capture command produces only numeric values, losing any existing preset references. |
Important: | |
The capture command translates the output of each parameter into the appropriate value on the absolute layer while activating a 0 value on the relative layer. For any parameter where the output was previously composed of a combination of absolute and relative values, the output will appear the same while relying only on the absolute layer with no relative offset. |
Syntax
Capture [Object] ["Object_Name" or Object_Number]
Examples
- To capture all attributes of the selected fixtures, type:
User name[Fixture]>Capture |
- To capture only the position attributes of the selected fixtures, type:
User name[Fixture]> Capture FeatureGroup "Position" |