grandMA3 User Manual Publication
SendMIDI Keyword
grandMA3 User Manual » Command Syntax and Keywords » General Keywords » SendMIDI
|
Version 2.0
|
Important: | |
If you do not define a channel value, the MIDI messages will be automatically addressed to channel 1. |
To enter the SendMIDI keyword in the command line, use one of the options:
- Type SendMIDI
- Type Sendm
Description
The SendMIDI keyword is a command keyword that is used to output MIDI notes, MIDI control change messages, and MIDI program change messages.
Syntax
SendMIDI "Note" (Channel/)Note (Velocity) (Status)
SendMIDI "Program" (Channel/)Value
SendMIDI "Control" (Channel/)Controller (Value)
Examples
- To send out the MIDI note 42 on MIDI channel 2 with a velocity of 99, type:
User name[Fixture]>SendMIDI "Note" 2/42 99 |
- To send out the MIDI note 37 on MIDI channel 1, type:
User name[Fixture]>SendMIDI "Note" 37 |
- To send out the MIDI control value 64 to MIDI channel 1 controller 8, type:
User name[Fixture]>SendMIDI "Control" 1/8 64 |
- To send out a MIDI program change of 12, type:
User name[Fixture]>SendMIDI "Program" 12 |