Timer Keyword
grandMA3 User Manual » Command Syntax and Keywords » General Keywords » Timer
|
Version 2.0
|
To enter the Timer keyword in the command line, use one of the options:
- Press MA + X6 | TC + X6 | TC + X6 | TC
- Type Timer
Description
Timer is an object keyword which is used to access the timer objects.
Timers are stored in the Timer pool. There are two types of timers:
- Stopwatch - counting up from zero.
- Countdown - counting down to zero.
They can be controlled using the Timer pool or the command line.
For more information on timers see Timers topic.
Syntax
[Function] Timer ["Timer_Name" or Timer_Number] (Property ["Setting"] ["Setting_Value"])
Settings
In some settings you have to assign an object. To do so use the Assign Keyword.
Other settings contain a text option or a value. Use the Set keyword for these settings.
The following table displays the settings that have to have an object:
Setting | Object | Description |
---|---|---|
Appearance | "Appearance 1" | Assigns the appearance to the pool object. |
Scribble | "Scribble 1" | Assigns the scribble to the preset pool object. |
The following table displays the settings that have to have an option or value:
Setting | Option/Value | Description |
---|---|---|
Name | "Timer Name" | Sets the name of the timer pool object. |
Note | "This is a note" | This is the note to the timer pool object. |
TimerMode | "Stopwatch" / "Countdown" | Modes of the timer. |
TimeReadout | One of the four readout options | Readout options in the timer. |
RestartOption | "Continue on Go+" / "Reset on Go+" | Sets if the timer should restart or continue with a new Go+. |
TimerLinkType | One of the five link options | Timers can be linked to sequences and can be activated or toggled. |
CountdownAlertType | One of the four alert type options | Defines what should happen once the countdown has elapsed. |
CountdownAlertRange | "Local" / "All Stations" | Defines where an alert pop-up should appear. |
CountdownDuration | Time value | Sets the duration of the countdown. |
AlertCommand | "Command Line Input" | The command that can be executed once the countdown has elapsed. |
AlertText | "Text that appears in a pop-up" | The text is displayed in an alert pop-up. |
FrameFormat | One of the five frame format options | A setting that defines which of five formats is used in the timer. |
AlertDuration | Time value | Displays the duration of the alert pop-up. |
For more information on the settings of the Timer see Timer.
Examples
- To run timer 1, type:
User name[Fixture]>Go Timer 1 |
- To change the timer mode in timer 2, type:
User name[Fixture]>Set Timer 2 "TimerMode" "Countdown" |
- To set timer 2 to a countdown time of 25 seconds, type:
User name[Fixture]>Set Timer 2 "CountdownDuration" 25 |