grandMA3 User Manual Publication
Example Macros

grandMA3 User Manual » Macros » Example Macros
Version 2.0

This topic has some example macros. They are meant as inspiration for other macros. In addition, they show some of the possibilities with macros.

Calling Macros by Macros

This example shows how macros triggered by other macros can have different results.

  1. Create two Macros as shown below:

Macro 1

Lock No Name Command Wait Enabled AddToCmdl Execute
  1 MacroLine 1 Macro 2; Echo "Macro 1 Line 1 - Trigger Macro 2" Follow Yes No Yes
  2 MacroLine 2 Echo "Macro 1 Line 2" Follow Yes No Yes
  3 MacroLine 3 Echo "Macro 1 Line 3" Follow Yes No Yes
  4 MacroLine 4 Echo "Macro 1 Line 4" Follow Yes No Yes
  5 MacroLine 5 Echo "Macro 1 Line 5 - Last" Follow Yes No Yes

Macro 2 

Lock No Name Command Wait Enabled AddToCmdl Execute
  1 MacroLine 1 Echo "Macro 2 Line 1" Follow Yes No Yes
  2 MacroLine 2 Echo "Macro 2 Line 2" Follow Yes No Yes
  3 MacroLine 3 Echo "Macro 2 Line 3" Follow Yes No Yes
  4 MacroLine 4 Echo "Macro 2 Line 4" Follow Yes No Yes
  5 MacroLine 5 Echo "Macro 2 Line 5 - Last" Follow Yes No Yes
  1. Tap Macro 1. As a result, all lines except line 5 of macro 2 are executed.
  2. Disable lines 3 and 4 of Macro 1. As a result, Lines 1, 2, and 5 of Macro 1 are executed and Lines 1 and 2 of Macro 2 are executed.

Macros triggered by other macros in this way will also stop when the first macro stops. In order to overcome this, Call Macro X command should be used.

Change User

This macro opens the login window where you can enter a new username and password.

Lock No Name Command Wait Enabled AddToCmdl Execute
  1 MacroLine 1 LogIn Follow Yes No Yes

World Is Selection

This predefined macro will create a temporary world for the selected fixtures.

Lock No Name Command Wait Enable AddToCmdl Execute
  1 MacroLine 1 Delete World 999 /NoConfirmation Follow Yes No Yes
  2 MacroLine 2 Store World 999 Follow Yes No Yes
  3 MacroLine 3 World 999 Follow Yes No Yes

Block Sequence

This macro will prompt you for a sequence ID and a cue number to block.

Lock No Name Command Wait Enable AddToCmdl Execute
  1 MacroLine 1 Block Sequence (Sequence #) Cue (Cue #) Follow Yes No Yes
Hint:
If no cue number is entered, the entire sequence will be blocked