grandMA3 User Manual Publication
Technical Data

Technical Data

Hint:
grandMA3 I/O Nodes PoE can also be powered by a direct power connection using a PoE switch, or a PoE injector.
Important:
Only use adequately protected power cables (min. Ø = 3 x 1.0 mm²).
The required power cable must meet the country's standards.
Only qualified personnel is allowed to perform work on the power cable!
Important:
Power cable and connector are not included in the delivery. 
Important:
Use the USB port for updates only. Do not connect any peripheral devices (for example, mouse, keyboard).
  • Use CAT-5e Ethernet cable or higher. Max. length of the cable 75 m.

grandMA3  I/O Node

Technical Data  
Parameters None
Display 3.9 '' TFT color 
Operating voltage (electrical grid) 100-240 V AC, 50/60 Hz
Operating voltage (PoE) IEEE 802.3af; 48 V DC/max. 12 W
Net weight 2 kg / 5 lbs
Power max. 15 VA
Dimensions 207 x 184 x 43 mm / 9 x 8 x 2 in (width x depth x height)

 

Outputs grandMA3 I/O Node 

Number Connector
1 x powerCON TRUE1*
1 x MIDI In
1 x MIDI Out
1 x LTC
1 x DC Remote IN
1 x etherCON/RJ45       L (link)   G  (gigabit)
1 x USB 2.0 (type A)**

  * registered trademark of Neutrik AG, Liechtenstein
  ** Do not connect any peripheral device (mouse, keyboard, or similar).

 

grandMA3 I/O Node DIN-Rail

Technical Data  
Parameters None
Display 3.9"   TFT  Color
Operating voltage 100-240 V AC, 50/60 Hz
Operating voltage (PoE)

IEEE 802.3af    48 V DC / max. 12 W

Net weight 1 kg / 3 lbs
Power max. 15VA 
Dimensions 150 x 50 x 90 mm / 6 x 2 x 4 in (width x depth x height)

 

Outputs grandMA3 I/O Node DIN-Rail

Number Connector
1 x MIDI In
1 x MIDI Out
1 x LTC
1 x DC Remote
1 x etherCON/RJ45       L (link)   G  (gigabit)
1 x USB 2.0 (type A)**

  ** Do not connect any peripheral device (mouse, keyboard, or similar).