grandMA3 User Manual Publication
Technical Data

Technical Data

Hint:
grandMA3 xPort Nodes PoE can also be powered by a direct power connection using a PoE switch, or a PoE injector.
Important:
Only use adequately protected power cables (min. Ø = 3 x 1.0 mm²).
The required power cable must meet the country's standards.
Only qualified personnel is allowed to perform work on the power cable!
Important:
Use the USB port for updates only. Do not connect any peripheral devices (for example, mouse, keyboard).
Each 5pin DMX512-A Out can be individually configured as DMX In. 
  • DMX: The maximum length of the cable is 350 m (in ideal conditions).
  • Use CAT-5e Ethernet cable or higher. Max. length of the cable 75 m.
 

grandMA3 8Port Node and grandMA3 8Port Node PoE

grandMA3 8Port Node – front panel
Technical Data  
Parameters None
Display 3.9 '' TFT color 
Operating voltage (electrical grid) 100-240 V AC, 50/60 Hz
Operating voltage (PoE) IEEE 802.3af; 48 V DC/max. 12 W
Net weight 2 kg / 5 lbs
Power max. 15 VA 
Dimensions 482 x 189 x 43 mm / 19 x 8 x 2 in (width x depth x height)

Outputs grandMA3 8Port Node and Outputs grandMA3 8Port Node PoE

grandMA3 8Port Node – rear panel
Number Connector
1 x  powerCON TRUE1 (registered trademark of Neutrik AG, Liechtenstein)
1 x etherCON/RJ45
8 x 5pin XLR (DMX512-A Out)
1 x USB 2.0 (type A), for update via USB flash drive only.
 

grandMA3 4Port Node and grandMA3 4Port Node PoE

grandMA3 4Port Node – front panel
Technical Data  
Parameters None
Display 3.9 '' TFT color 
Operating voltage 100-240 V AC, 50/60 Hz
Operating voltage (PoE) IEEE 802.3af; 48 V DC/max. 12 W
Net weight 2 kg / 5 lbs
Power max. 15 VA
Dimensions 207 x 184 x 43 mm / 9 x 8 x 2 in (width x depth x height)

Outputs grandMA3 4Port Node and grandMA3 4Port Node PoE

grandMA3 4Port Node – rear panel
Number Connector
1 x  powerCON TRUE1 (registered trademark of Neutrik AG, Liechtenstein)
1 x etherCON/RJ45
4 x 5pin XLR (DMX512-A Out)
1 x USB 2.0 (type A), for update via USB flash drive only.
 

grandMA3 2Port Node and grandMA3 2Port Node PoE

grandMA3 2Port Node – front panel
Technical Data  
Parameters None
Display 3.9 '' TFT color 
Operating voltage 100-240 V AC, 50/60 Hz
Operating voltage (PoE) IEEE 802.3af; 48 V DC/max. 12 W
Net weight 2 kg / 5 lbs
Power max. 15 VA
Dimensions 207 x 184 x 43 mm / 9 x 8 x 2 in (width x depth x height)

Outputs grandMA3 2Port Node and grandMA3 2Port Node PoE

grandMA3 2Port Node – rear panel
Number Connector
1 x powerCON TRUE1 (registered trademark of Neutrik AG, Liechtenstein)
1 x etherCON/RJ45
2 x 5pin XLR (DMX512-A Out)
1 x USB 2.0 (type A), for update via USB flash drive only.
 

grandMA3 onPC 8Port Node 4k and grandMA3 onPC 8Port Node 4k PoE

Technical Data  
Parameters 4 096 (HTP/LTP) / 2 048 (HTP/LTP) (Mode2)
Display 3.9 '' TFT color 
Operating voltage (electrical grid) 100-240 V AC, 50/60 Hz
Operating voltage (PoE) IEEE 802.3af, 48 V DC/max. 12 W 
Net weight 2 kg / 5 lbs
Power max. 15 VA 
Dimensions 482 x 189 x 43 mm / 19 x 8 x 2 in (width x depth x height)

grandMA3 onPC 4Port Node 4k and grandMA3 onPC 4Port Node 4k PoE

Technical Data  
Parameters 4 096 (HTP/LTP) / 2 048 (HTP/LTP) (Mode2)
Display 3.9 '' TFT color 
Operating voltage (electrical grid) 100-240 V AC, 50/60 Hz
Operating voltage (PoE) IEEE 802.3af 48 V DC/max. 12 W 
Net weight 2 kg / 5 lbs
Power max. 15 VA 
Dimensions 207 x 184 x 43 mm / 9 x 8 x 2 in (width x depth x height)

grandMA3 onPC 2Port Node 2k and grandMA3 onPC 2Port Node 2k PoE

Technical Data  
Parameters 4 096 (HTP/LTP) / 1 024 (HTP/LTP) (Mode2)
Display 3.9 '' TFT color 
Operating voltage (electrical grid) 100-240 V AC, 50/60 Hz
Operating voltage (PoE) IEEE 802.3af; 48 V DC/max. 12 W 
Net weight 2 kg / 5 lbs
Power max. 15 VA 
Dimensions 207 x 184 x 43 mm / 9 x 8 x 2 in (width x depth x height)