grandMA3 User Manual Publication
CueFade Keyword
|
grandMA3 User Manual » Command Syntax and Keywords » General Keywords » CueFade
|
Version 2.1
|
To enter the CueFade keyword in the command line, use one of the options:
- Press Time (If the Time Key Target is set to Cue. For more information see User Settings and Time Key.)
- Type CueFade
- Type Cuef
Description
CueFade can set both the infade and the outfade time of a cue. To do so, use a /. See examples further down.
As a helping keyword for programming functions (for example Store), this keyword sets the fade time of a cue or a cue part.
Syntax
(Cue ["Cue_Name" or Cue_Number]) CueFade [CueFade_Time]
(Cue ["Cue_Name" or Cue_Number]) CueFade [CueInFade_Time]/[CueOutFade_Time]
Examples
- To enter a fade of 5 seconds in a cue, type:
|
User name[Fixture]>CueFade 5 |
- To set an infade of 6 seconds and an outfade of 12 seconds in the current cue of the selected sequence, type:
|
|
User name[Fixture]> CueFade 6/12 |
- To adjust the CueInFade to 3 seconds, but leave the CueOutFade as it was, type:
|
|
User name[Fixture]>CueFade 3/ |
- To enter a fade of 5 seconds in cues 1 to 4, type:
|
|
User name[Fixture]>Cue 1 Thru 4 CueFade 5 |
- To enter a fade time of 1 hour 22 minutes 56.3 seconds in cue 1 of the selected sequence, type:
|
|
User name[Fixture]>Cue 1 CueFade 1h22m56.3 |
Or press:
Time 1 . . . 2 2 . . 5 6 . 3
- To double the CueFade time, type:
|
|
User name[Fixture]>CueFade * 2 |
- To subtract 3 seconds from the CueFade time, type:
|
|
User name[Fixture]>CueFade - 3 |