grandMA3 User Manual Publication

Offset Keyword

grandMA3 User Manual » Command Syntax and Keywords » General Keywords » Offset
Version 2.1
Hint:
-Store Offset is more precise when the resulting offsets are as small as possible. 
-It is also possible to use relative values in the programmer.

To enter the Offset keyword in the command line, use one of the options:

  • Press MA + Update
  • Type Offset
  • Type the shortcut Offs
Important:
If you use the key combination MA + Update to enter the Offset keyword in the command line, make sure you enter the Store keyword in the command line first.

Description

The Offset keyword is a helping keyword that helps calculate the pan and tilt offset in fixtures. 

Syntax

[Function] Offset 

Example

Requirement:

  1. Call a preset into the programmer or play a cue in the fixtures where you want to calculate the offset;
  2. The position of the fixtures in 3D have to be aligned with the fixtures on real stage;
  3. Adjust the pan and tilt values in the programmer so that the fixtures are in the same position on real stage.
  • To calculate and use offset in the selected fixtures, type:
User name[Fixture]>Store Offset