grandMA3 User Manual Publication

Park Keyword

grandMA3 User Manual » Command Syntax and Keywords » General Keywords » Park
Version 2.1

To enter the Park keyword in the command line, use one of the options:

  • Press Pause Pause
  • Type Park

Description

The Park keyword is a command keyword which is used to prevent DMX channels of fixtures to change their value.

Syntax

Park [Object] ["Object_Name" or Object_Number]

Examples

  • To park fixture 1 with all its attributes, type:
User name[Fixture]>Park Fixture 1

 

  • To park the current selection, type:
User name[Fixture]>Park

It is also possible to enter Park into the command line and tap a cell in the fixture sheet to park a certain attribute.

To unpark fixtures and/or attributes, see the Unpark Keyword.

Important:
When parking a fixture and/or attribute it will park the corresponding DMX channel.

  • To park all DMX channels of fixture 1 at 50%, type:
User name[Fixture]>Park Fixture 1 At 50

 

Hint:
The command Park Fixture At will park all DMX channels of the fixture to the value that is set.


  • To park only DMX channels for FeatureGroup 1 at 50, type:
User name[Fixture]>Park Fixture 1 At 50 If FeatureGroup 1

 

  • To park DMX universe 2, type:
User name[Fixture]>Park DMXUniverse 2

To specify the universe:

  1. Enter the Park keyword in the command line.
  2. Tap the universe in the universe pool.

 

  • To park DMX channel 20 on the first universe, type:
User name[Fixture]>Park DMXUniverse 1.20

To specify the DMX channel:

  1. Enter the Park keyword in the command line.
  2. Tap the channel in the DMX sheet.
Hint:
If there are parked channels in a universe, they will be indicated by a blue P icon in the universe pool.