New Show File

To create a new show file:

1. Open the Backup menu and tap New Show. The New Show overlay opens:

2. Type to rename the file or keep the automatically generated show file name.
3. Tap New Show in the bottom right corner.
4. When the currently loaded show file has changes, a Warning pop-up appears. To continue, choose an option.
   When the currently loaded show file does not have any changes, the Create New Show pop-up appears. Tap New Show.

	Hint:
	It is possible to use local letters in the filename, like æ, õ, and ä.

	Hint:
	Use the NewShow keyword to create a new show from the command line.

Clear Show Segments

1. To define which segments of the current show file should be cleared for the new show, use the four checkbox buttons on the right side:

• Clear Show Data: Clears the show-relevant data from the show file. Includes the patch, pool objects, user, and user profiles. This checkbox is marked as default.
• Clear Local Settings: Clears the local settings. For example, this includes web remote settings and onPC settings.
• Clear Output Stations: Clears the setup of all DMX ports, the SMPTE settings, and the MIDI settings.
• Clear DMX Protocols: Clears the configuration of all available DMX protocols (Art-Net and sACN).

2. Selected data will be cleared after tapping New Show.

• Check All is a fast selection for all checkboxes.
• The data of the currently loaded show file will be kept for the segments, where the checkbox buttons are not enabled.

	Hint:
	Make sure to at least select one checkbox button to enable New Show.