grandMA3 User Manual Publication

Offset Keyword

grandMA3 User Manual » Command Syntax and Keywords » General Keywords » Offset
Version 2.2
Hint:
Store Offset is more precise when the resulting offsets are as small as possible. 
It is also possible to use relative values in the programmer.

To enter the Offset keyword in the command line, use one of the options:

  • Press MA + Update
  • Type Offset
  • Type the shortcut Offs
Important:
If you use the key combination MA + Update to enter the Offset keyword in the command line, make sure you enter the Store keyword in the command line first.

Description

The Offset keyword is a helping keyword that helps calculate the pan and tilt offset in fixtures. 

Syntax

[Function] Offset 

Example

Requirement:

  1. Call a preset into the programmer or play a cue in the fixtures where you want to calculate the offset;
  2. The position of the fixtures in 3D have to be aligned with the fixtures on real stage;
  3. Adjust the pan and tilt values in the programmer so that the fixtures are in the same position on real stage.
  • To calculate and use offset in the selected fixtures, type:
User name[Fixture]>Store Offset