grandMA3 User Manual Publication

Connect MIDI

grandMA3 User Manual » First Steps » Connect MIDI
Version 2.0

MIDI connectors can be used for MIDI input or output. For example to send the MIDI timecode signal to the sound engineer.

 

  1. To access the Output configuration window, press Menu and tap Connector Configuration.

-OR-

  1. Use the command line to open the menu:
User name[Fixture]>Menu "ConnectorConfig"
  1. To select the MIDI Mode, tap and hold or right-click MIDI Mode. A pop-up window opens.
  2. To set the MIDI direction, select In, Out, or Through.
  3.  Connect the MIDI source to the DIN connector on the rear panel of the console.
Hint:
MIDI Mode 'Through' receives and forwards MIDI Notes, MIDI Control Changes, and MIDI Program Changes.

Location of MIDI Connectors on Different Products

grandMA3 full-size (CRV) and light (CRV) rear panel – MIDI
grandMA3 compact (XT) rear panel – MIDI
grandMA3 onPC command wing (XT) rear panel – MIDI
 

 

grandMA3 I/O Node rear panel – MIDI
grandMA3 I/O Node DIN-Rail top panel – MIDI
Hint:
For more information on DIN connector pinout, see Connector Pin Assignment.