Master Area

1. Master knobs 1+2
2. Master keys 1+2
3. Master faders 1+2
4. Pause key
5. Go- key
6. Go+ key

---

Go+, Go- and Pause

The Go+ [Large] key, the Go- [Large] key, and the Pause [Large] key are located in the lower part of the master area. These keys execute the Go+, Go- or Pause command for the selected sequence.

For more information about Go+, Go- and Pause, please see the Go+[Large] key, Go-[Large] key, or the Pause[Large] key topic.

---

Master Fader 1 and Master Fader 2

The two faders in the master area are master fader 1 and master fader 2.

By default, master fader 1 is set to the master function for the selected sequence.

By default, master fader 2 is set to the crossfade function for the selected sequence.

• To change the function of the faders, please read below.

---

Master Key 1 and Master Key 2, Master Knob 1 and Master Knob 2

	Restriction:
	Master keys and master knobs are only available on grandMA3 full-size (CRV) and grandMA3 light (CRV) consoles.

The master keys 1+2 and the master knobs 1+2 are located in the upper part of the master area.

By default, these are set to toggle Highlight and Solo on and off and set the intensity of these.

• To change the function of these buttons and knobs, please read the topic Special Executors.

The master area is located between the command area and the executor area.