grandMA3 User Manual » Remote In and Out » DMX Remotes

Version 2.1

The DMX Remotes tab uses DMX channels as remote triggers. The DMX source can also be the console itself.

• To learn more about the hardware part of the input, read the Connect DMX topic.
• To learn more about the general Remotes settings, see Remote In and Out.

The following parameters are used in the DMX Remotes configuration:

• Address: Sets the DMX Address.
• Resolution: Sets the DMX Resolution.

---

Example

1. To adjust the settings of the DMX Remotes, tap DMX Remotes. The DMX Remotes menu opens:

2. To set the DMX address the DMX Remote input should listen to, right-click or tap and hold Address.

3. To adjust the DMX resolution, open the Resolution cell of the DMX Remote entry you want to edit.

	Hint:
	The DMX Remote can be controlled by 16 bit or 24 bit DMX channels. This allows for more precise control.

	Hint:
	On the controlling DMX device, the 16 bit and 24 bit channels must be patched directly after the 8 bit channel.