The control bar allows fast access to the shutdown command, essential menus, additional displays (in grandMA3 onPC), online help, and At filter.

On console displays, the control bar is hidden on all screens by default. Within the onPC application, the control bar is shown along the left edge of screens 1 through 5 by default. In consoles and the onPC application, the control bar can appear along the left edge of screens 1 through 7.

To show or hide the control bar, tap Show Control Bar in the Configure Display pop-up for the desired screen or press the left arrow at the left side of the command line. For more information about the display configuration, see Configuration of Displays.

Another quick and easy way to toggle the control bar is to tap on the  icon in the command line.

• Tap the icon at the top of the control bar to open the shutdown menu.
• Tap the icon in the control bar to open the main menu. For more information, see Menus.
• Tap the   icon in the control bar to open the command section pop-up. For more information, see Command Section. 
• Tap the   icon in the control bar to open the master controls pop-up. For more information, see Master Controls.
• Tap the  icon in the control bar to open the custom master section pop-up. For more information, see Special Executors.
• Tap the   icon in the control bar to open the playback controls pop-up. For more information, see Playback Controls.
• Tap the  icon in the control bar to open the Encoder Bar pop-up. 
• Tap the   icon in the control bar for access to all of the available displays within the grandMA3 onPC application. This option is only available in grandMA3 onPC. For more information, see Displays in grandMA3 onPC.
• Tap the   icon in the control bar to enter the Help keyword into the command line. For more information, see Help keyword.
• Tap the icon in the control bar to toggle the main encoder bar to the command wing bar in the grandMA3 onPC application. This option is only available in grandMA3 onPC. For more information, see Command Wing Bar.
• Tap the  icon in the control bar to open the At Filter pop-up. For more information, see below.

At Filter Pop-Up

The At  allows quick access to various programmer functions and special values.

• Tap At Filter to open the temporary At Filter menu.
• Tap Cut Programmer, Copy Programmer, and Paste Programmer to cut, copy, and paste the contents of the programmer. For more information, see the What is the Programmer topic.
• Tap Delete Steps to delete the current phaser step or steps from the programmer. For more information, see the Phasers topic.
• Tap Clear to access the same three clear keywords available by pressing the Clear key. For more information, see the Clear Key topic.
• Tap Full, Zero, Default, Normal, On, Off, Release, or Remove to apply the desired special attribute value to the selection. On and Off apply to the selection. Full, Zero, Default, Release, and Remove apply to the dimmer attribute of the selection. For more information, see the Specials section in the Calculator topic.
• Tap Edit Recipe to enable edit recipe mode. For more information, see Recipe Editor Window.
• Tap and hold At   to open the temporary At Filter. For more information, see At Filter Window.