grandMA3 User Manual Publication
Layout Encoder Bar

grandMA3 User Manual » Layouts » Layout Encoder Bar
Version 2.1

Use the layout encoder bar to position and arrange layout elements.

Requirements:

  • A visible layout pool and a visible layout window.

For more information on how to add a window, see Add windows.

There are two function settings for the layout encoder bar: Position and Arrangement.

Layout Encoder Bar Function Set to Position

  1. Create a layout and select it. See Create a layout.
  2. Tap Setup in the title bar to enable Setup; the layout encoder bar is displayed.
  3. Tap Function in the layout encoder bar until it is set to Position.
  4. Select the layout element (e.g., fixture) you wish to position.
  5. Use the encoders to position and/or resize the element.
Hint:
When multiple elements are selected, use the Align function combined with the dual encoders to spread out your selection evenly.
Layout Encoder Bar

  • Pos X: Rotate the inner ring of the dual encoder to move the selected element left and right.

  • Pos Y: Rotate the inner ring of the dual encoder to move the selected element up and down.

  • Width: Rotate the outer ring of the dual encoder to set the width of the selected element.

  • Height: Rotate the outer ring of the dual encoder to set the height of the selected element.

  • Scale: Scales the arrangement of the selected elements in the X and Y direction.

  • Ratio: Scales the arrangement of the selected elements in the X direction.

  • Rotate: Rotates the selected fixtures on the canvas and changes their position as a group. When only one fixture is selected, the encoder is grayed out.

  • Change on EncoderEvent: When set to Yes, encoder changes are instantly transmitted to the network. If set to No, after stopping to turn an encoder the actual state will be transmitted after 2s.

  • Reset Position: Tap to position the bottom left corner of the selected elements to Pos X and Pos Y zero.

  • Edit Selected: Tap to enter the layout element editor.

Layout Encoder Bar Function Set to Arrangement

  1. Create a layout and select it.
  2. Tap Mode in the title bar to enable Setup; the layout encoder bar is displayed.
  3. Tap Function in the layout encoder bar until it is set to Arrangement.
  4. Select the layout elements (e.g., fixtures) you wish to position.
  5. Tap and hold LayoutType, the Select Layout Type drop-down menu opens.
  6. Select one of the four arrangement types: Line, Grid, Circle, or Camera.

 For more information on Line, Grid, and Circle arrangements, see Position fixtures in the 3D space.

Camera Arrangement

Arrange your current selection similar to your camera view in the 3D window. Use the encoders to select a camera, set the scale and ratio factor, and move the selected elements.

Layout encoder bar function set to Arrangement

To do so:

  1. Tap Function until it is set to Arrangement.
  2. Tap Layout Type until it is set to Camera.

Set the following parameters using the dual encoders:

  • Camera: Select the desired camera.
  • Scale: Scales the whole selection in X and Y direction.
  • Ratio: Defines the ratio of the selection.
  • Move X: Move the whole selection in the X direction for a more convenient position.
  • Move Y: Move the whole selection in the Y direction for a more convenient position.
Hint:
Press the first dual encoder inner ring or the first dual encoder key to open the camera calculator. Select a camera from the list or enter a camera number.
  1. When you're satisfied with your layout setup, tap Apply to confirm.
Hint:
When Apply on change is active, Apply is disabled, and changes are made in real-time.