|
grandMA3 User Manual » Workspace » User Interface » Control Bar
|
Version 2.0
|
The control bar allows fast access to the shutdown command, essential menus, additional displays (in grandMA3 onPC), online help, and At filter.
On console displays, the control bar is hidden on all screens by default. Within the onPC application, the control bar is shown along the left edge of screens 1 through 5 by default. In consoles and the onPC application, the control bar can appear along the left edge of screens 1 through 7.
To show or hide the control bar, tap Show Control Bar in the configure display menu for the desired screen or press the left arrow at the left side of the command line.
Another quick and easy way to toggle the control bar is to tap on the 
icon in the command line.
- Tap the
icon at the top of the control bar to open the shutdown menu. - Tap the
icon in the control bar to open the main menu. For more information, see Menus. - Tap the
icon in the control bar to open the command section overlay. For more information, see Command Section. - Tap the
icon in the control bar to open the master controls overlay. For more information, see Master Controls. - Tap the
icon in the control bar to open the custom master section overlay. For more information, see Special Executors. - Tap the
icon in the control bar to open the playback controls overlay. For more information, see Playback Controls. - Tap the
icon in the control bar to open the Encoder Bar overlay. - Tap the
icon in the control bar for access to all of the available displays within the grandMA3 onPC application. This option is only available in grandMA3 onPC. For more information, see Displays in grandMA3 onPC. - Tap the
icon in the control bar to enter the Help keyword into the command line. For more information, see Help keyword. - Tap the
icon in the control bar to toggle the main encoder bar to the command wing bar in the grandMA3 onPC application. This option is only available in grandMA3 onPC. For more information, see Command Wing Bar. - Tap the
icon in the control bar to open the at overlay. For more information, see below.
At Overlay
The at overlay allows quick access to various programmer functions and special values.
- Tap At Filter to open the at filter overlay. For more information, see the At Filter topic.
- Tap Cut Programmer, Copy Programmer, and Paste Programmer to cut, copy, and paste the contents of the programmer. For more information, see the What is the Programmer topic.
- Tap Delete Steps to delete the current phaser step or steps from the programmer. For more information, see the Phasers topic.
- Tap Clear to access the same three clear keywords available by pressing the Clear key. For more information, see the Clear Key topic.
- Tap Full, Zero, Default, Normal, On, Off, Release, or Remove to apply the desired special attribute value to the selection. On and off apply to the selection. Full, zero, default, release, and remove apply to the dimmer attribute of the selection. For more information, see the Specials section in the Calculator topic.