Timer Pool

Manage the stopwatch and the countdowns in the timer pool. 

1. Open the timer pool:
   -Tap Pools in Create Basic Window. For more information on how to open a basic window see Manage windows.
   -Tap Time and the timer pool opens.

2. Set a new timer, for example Countdown:
   -Press Edit and then tap an empty cell in the timer pool.
   -The pop-up Edit Timer opens.

   

3. Now, select the timer mode:
   -Tap the drop-down and tap Countdown.
4. Set the time unit:
   -To set the time, tap Time Unit.
   -The pop-up Select Time Unit opens.

   

   
   -Tap to select the unit, for example 1 / 10 Seconds.
5. To continue the countdown after restart, tap When Restarting. The button toggles between Continue or Reset. 
6. To set a link to an executor, tap Exec Trigger.
   -The pop-up Select Exec Trigger opens.

   

   
   -If you do not want to set a link to an executor, tap Not linked. 

Exec Triggers

• LinkSelected-Start and LinkSelected-Toggle are linked to the executors you have selected.
  -If an executor is linked as LinkSelected-Start, the commands GO, GOTO, and TOP start the timer. 
  -If an executor is linked as LinkSelected-Toggle, the timer toggles between start and pause. 

• LinkLastGo-Start and LinkLastGo-Toggle are linked to all executors, also the ones you have selected. 
  -If the link is set as LinkLastGo-Start, the commands GO, GOTO, and TOP start the timer on all executors. 
  -If the link is set as LinkLastGo-Toggle, the timer toggles between start and pause on all executors.  

7. Label the timer you have set:
8. -Tap Label and an editor opens.
   -Type the name of the timer and press Please.
9. Set countdown time and alert duration:
   -Tap the green button below Countdown Time and the calculator opens.
   -Enter the time of the countdown.
   -Tap the green button below Alert Duration and the calculator opens.
   -Enter the duration of the alert.
10. Now, select the type of the alert:
    -Tap Alert Type and the pop-up Select Alert Type opens.

    

    
    -Tap Command, Pop-up & Beep.
    -The alert can now be set off via the command line simultaneously displaying a warning pop-up and an audio signal on the console.
11. Set the range of the alert:
     -To toggle the range of the alert to Local, tap Alert Range.
    -The alert only sets off on the console currently in use.
12. Type the command that is to be executed in the session master:
    -Tap the green button below Alert Command executed on Master and an editor opens.
    -Enter the command.
13. Enter the message that is to be displayed in the warning pop-up as soon as the alert sets off.
    -Tap the green button below Alert Text.
    -An editor opens. 
    -Enter the message of the pop-up.
14. The countdown is now set.