grandMA3 User Manual » Windows, Views, and Menus » Menus

Version 2.0

There are many different menus in the grandMA3 software. Most are described in relevant sections. For instance, the patch menu is described in the Patch section.

There is a Menu pop-up that gives access to many of the different menus.

This pop-up can be opened in multiple ways:

• On physical hardware, there is a Menu key. Press this to open the pop-up.
• In the Control Bar on the left side of most displays, on the onPC, there is a gear icon . Tap this to open the pop-up.
• It can be opened using the command line:

User name[Fixture]>Menu "MenuSelector"

The menu pop-up gives access to the following menus:

• Patch:
  This is where fixtures are added and is all about fixture setup. Read more in the Patch and Fixture Setup section.
• Live Patch:
  This menu gives access to the fixture setup that can be changed without a new show upload - Read more in the Patch and Fixture Setup section.
• Connector Configuration:
  The connector configuration changes the local physical DMX ports on the MA equipment.
• Desk Lights & Color Theme:
  This opens a pop-up that gives access to customize the look of the software.
• Network:
  This menu is used to set up all about the network and sessions - read more in the Networking section.
• In & Out:
  This opens the In & Out menu with settings for DC remote, MIDI remote, DMX remotes, OSC, and PSN.
• DMX Protocols:
  This menu is used to set up DMX network protocols.
• Settings: This opens a small sub-menu that has these options:
  • User Configuration:
    This menu is used to set up users and user profiles - read more in the Single User and Multi-User Systems section.
  • Date and Time:
    This menu is used to change the time and date in the console. Read more in the Date and Time topic.
  • USB Configuration:
    This is used to configure USB devices. This should normally not be changed manually.
  • Software Update:
    This menu is used to update the software.
  • Touch Configuration:
    This menu is used to assign touch screens to the USB inputs.
  • Extension Configuration:
    This menu shows the connected grandMA3 extensions.
  • onPC Local Settings (onPC only):
    This is a pop-up with onPC settings.
  • Local Settings (consoles only):
    This is a pop-up with settings for the local console.
• Backup:
  The backup menu is used to save and load shows - read more in the Show File Handling topic.
• Quick Save:
  This is not a menu but a shortcut to saving the show with the same show file name.
• Show Creator:
  This opens the Show Creator menu that can be used to create presets and groups. It is also possible to import and export different objects of the show file.
• Preferences and Timings:
  This is where the defaults are set up for cues and sequences - read more in the Cue Timing topic.Display Overlay

Opening the Menu pop-up also opens a Display overlay.

This pop-up appears on all screens except the letterbox screens.

Most of the actions performed using this pop-up relate to the specific screen where the menu is touched. For instance, deleting a screen (removing the windows from the screen).

• Delete All Screens:
  This clears all windows from screens - read more in the Remove Windows from a Screen topic.
• Delete This Screen:
  This clears all windows from this screen - read more in the Remove Windows from a Screen topic.
• Configure Display:
  This opens the Configure Display pop-up - read more in the Configuration of Displays topic.
• Set Dialogs to This Display:
  This makes all menus open on this screen - read more in the Change Menu Locations topic.
• Set Dialog Positions to Default:
  This resets all menus to open on the default screen - read more in the Change Menu Locations topic.