Connect the Hardware

Requirement:
Shielded twisted pair cable with RJ45 connector, min. Cat 5e
- or -
etherCON cable with Neutrik etherCON connector.
 

Connection with a PC

1. Plug in the power cable into the switch.
   The switch starts booting.
2. Plug in a network cable into one of the Ethernet ports of the switch.
   For the PC connection and for further configuration, you have to use a manage group port. We recommend port 13 at the front.
3. Plug in the other end of the network cable into the Ethernet port on the PC.
   A green or orange link LED on the switch indicates a successful connection.

The MA Network Switch is connected with the PC.

Connection with a grandMA2

1. Plug in the power cable into the switch.
   The switch starts booting.
2. Plug in a network cable into one of the Ethernet ports of the switch.
3. Plug in the other end of the network cable into the Ethernet port 1 of the grandMA2 console.
   A green or orange link LED on the switch indicates a successful connection.

The MA Network Switch is connected with the grandMA2.