IfOutput Command
This page describes the syntax and how to use the IfOutput command.
To go to the IfOutput command, press If (= IfOutput) on the console.
Description
With the IfOutput command you can select all fixtures in the fixtures view with a current
- dimmer output above zero
- dimmer output in a range
- preset output
Syntax
1. Select all fixtures with a current dimmer output above zero.
2. Select all fixtures with the current dimmer output between 50 and 75.
3. Select all fixtures with the current output of color preset cyan.
Example 1
Let´s assume, you will select all fixtures with a current dimmer output above zero.
Press If (= IfOutput) Please.
All fixtures with a current dimmer output are selected in the fixtures view.
Example 2
Let´s assume, you will select all fixtures with a current dimmer output between 50 and 75.
Press If (= IfOutput) At 50 Thru 75 Please.
All fixtures with a current dimmer output between 50 and 75 are selected.
Example 3
Let´s assume, you will select all fixtures using currently the color preset "cyan" (4.2) to give them a new color preset "orange".
There are two ways to do this:
a) Press If (= IfOutput) and tap at preset "Cyan" in the color presets pool.
b) Press If (= IfOutput) Preset 4 (= preset pool color) . 2 (= second preset in the color preset pool) Please.
All fixtures using currently color preset "Cyan" (4.2) are selected and it is easy to give them another color preset.