Focus Preset Type View
To go to the Focus Preset Type View, tap Focus in the Preset Type Bar.
- or -
Press and hold 
and press 6, for preset type 6 (= Focus).
The focus preset type view is only active if the selected fixture type has focus attributes.
The focus preset type view is fragmented in the Focus/Zoom View tab and the Raw Focus View (depending on the fixture type).
The focus sliders works absolute. A tap on a focus slider sets a new focus value and does not follow the already set focus values.
The respective encoders works relative to the already set focus values.
To open the focus effects view at screen 1, tap at 
in the title bar.
If an effect is running on a selected fixture, the focus preset type view change into an effect mode and get a blue effect mode title bar.
Focus/Zoom View
The focus/zoom view is the first tab in the focus preset type view.
With the focus slider, you control the focus of the projection.
To select a focus value, move the focus slider up and down.
1 = near focus
100 = far focus
There are three focus default buttons: Far, Center and Near.
To select one of these values, tap on the corresponding button.
To select a zoom value in degrees, move the zoom slider up and down.
There are three zoom default buttons: Wide, Center and Narrow.
Raw Focus View
The raw focus view is the second tab of the focus preset type view.
In the raw focus view, you control the focus values in natural values (0-100) of the selected fixture type.
Encoder Bar Functions
The default encoder speed is without decimal place.
To change the encoder speed to slow, press the encoder key 
. The encoder speed is with decimal place.
To change the encoder speed to ultra slow, press and hold the 
key and press the encoder key . The encoder speed equals one DMX step.
Focus:
To select the values of the focus, turn the encoder left or right.
To open the calculator, press the encoder.
Zoom:
To select the values of the zoom, turn the encoder left or right.
To open the calculator, press the encoder.
Related Links