Select Command
This page describes the syntax and how to use the select command.
To go to the select command, press Select on the console.
Description
With the select command, you select fixtures
- by DMX address
- from a cue list stored on a executor
- from a specific cue
The selected fixtures are displayed in the fixtures view.
Syntax
1. Select fixtures in the fixtures view by DMX address.
2. Select all fixtures from a cue list stored on a executor.
3. Select all fixtures in a specific cue.
Example 1
Let´s assume, you will select the fixture using the DMX address 1.1.
Press Select and tap in the DMX view at 1.1.
The fixture with the DMX address 1.1 is selected.
Example 2
Let´s assume, you will select all fixtures from the cue list, stored on executor 1.
There are three ways to do this:
a) Press Select and then press the respective executor button e.g. 
.
b) Press Select and then tap on executor 1 in the executor bar view.
c) Press Select Exec 1 Please.
All fixtures stored on executor 1 are selected in the fixtures view.
Example 3
Let´s assume, you will select all fixtures from cue 1 on executor 1.
There are three ways to do this:
a) Press Select Cue 1 and then press the respective executor button e.g. .
b) Press Select Cue 1 and then tap on executor 1 in the executor bar view.
c) Press Select Cue 1 Exec 1 Please.
All fixtures from cue 1 on executor 1 are selected.