Off Command
This page describes the syntax and how to use the off command.
To go to the off command, press Off on the console.
Description
With the off command you can
- turn an executor off
- turn an executor with fade time off
- turn off all normal executors assigned with a cue list
- remove selected fixtures from the fixtures view
Syntax
1. Turn off the main executor.
2. Turn off an executor with fade time.
3. Turn off all normal executors with a cue list.
4. Remove fixtures along with their values from the programmer in the fixtures view.
Example 1
Let´s assume, you will turn executor 1 off.
There are three ways to do this.
a) Press Off, and the respective executor button 
.
b) Press Off Exec 1 Please.
c) Press Off, and tap the respective executor button in the executor bar view.
Executor 1 is off.
Example 2
Let´s assume, you will turn executor 1 off with a fade time of 2 seconds.
Press Off Exec 1 Time (=Fade) 2 Please.
Executor 1 will go off by a fade time of 2 seconds.
Example 3
Let´s assume, you will turn off all normal executors with a cue list.
Press Off Thru Please.
All normal executors with a cue list are off.
Example 4
Let´s assume, you have selected the fixtures 1 thru 10 and you will remove fixture 5 along with their values from the programmer in the fixtures view.
There are two ways to do this:
a) Press Off and then tap on fixture 5 in the fixtures view.
b) Press Off Fixture 5 Please.
Fixture 5 and their values are removed from the selection.