Park Command
This page describes the syntax and how to use the Park command.
To go to the Park command, press and hold 
+ Pause (=Park) on the console.
Park is in the command line.
Description
With the Park command, you can park
- the current value of a fixture
- a specific value of a fixture
- the values of a preset type from a fixture selection
- a specific DMX channel
Syntax
1. Park the the current values of a fixture.
2. Park all attributes of fixture 1 at 100 %.
3. Park the values of the dimmer preset type of the current fixture selection.
4. Park a specific DMX channel.
Example 1
Let´s assume you will park the current values of fixture 1.
There are two ways to do this:
a) Press and hold + Pause (=Park) and tap at fixture 1 in the fixtures view.
b) Press and hold + Pause (=Park) Fixture 1 Please.
Example 2
Let´s assume you will park all attributes of fixture 1 at 100 %.
Press and hold + Pause (=Park) Fixture 1 At 1 0 0 Please.
All attributes of fixture 1 are parked at 100 %.
Example 3
Let´s assume you will park all dimmer values of the current fixture selection.
There are two ways to do this:
a) Press and hold + Pause (=Park) and tap at Dimmer in the preset type bar.
b) Press and hold + Pause (=Park) + Preset (=PresetType) and enter in the command line the word Dimmer. Tap Enter.
All dimmer values of the current fixture selection are parked.
Example 4
Let´s assume you will park DMX channel 1.2.
There are two ways to do this:
a) Press and hold + Pause (=Park) and tap at DMX channel 1.2 in the DMX view.
b) Press and hold + Pause (=Park) DMX 1 . 2 Please.
DMX channel 1.2 is parked.