dot2
×
Version 1.9

Time defaults Window

To open the time defaults window, press Time on the console.

The time defaults window opens at screen 1.

In this window, you can set default timing for cues and preset types.

If a default timing is set, this time is always used for the following actions, e.g. store a cue.

If a time default is set and you try to store a cue, the Time key will blinking to remind you at the stored time defaults.

To leave the time defaults window, tap at the title bar or press Esc on the console.

Cue Timing

Cue timings have a lower priority than preset type timings. Cue timings will be replaced by preset type timings.
Example:
If you have a cue stored with a cue timing and including a preset type timing, the cue timing will be replaced for that preset from the preset type timing.

The following default cue timings are possible:

  • Fade
  • OutFade
  • Delay
  • OutDelay

To set a time, tap at the corresponding button and the calculator opens.

To reset all cue timings, tap at .

Preset Types Timing

Preset type timings have a higher priority than cue timings. Preset type timings will replace cue timings.
Example:
If you have a cue stored with a cue timing and including a preset type timing, the preset type timing will replace for that preset the cue timing.

You can set a fade or delay time to all available attributes.

To set a time, tap at [Cue] in the timing table. The calculator opens.

To reset all preset types timing, tap at .

Encoder Bar Functions

Fade:
To select the time without decimal place, turn the encoder left or right.
To select the time with decimal place, press encoder and then turn the encoder left or right.

Related Links