Unpark Command
This page describes the syntax and how to use the unpark command.
To go to the unpark command, press and hold 
+ small Go+ (=Unpark) at the console.
Unpark is in the command line.
Description
With the Unpark command, you unpark previous parked DMX channels
- of a fixture
- of preset type attributes from a fixture selection
Syntax
1. Unpark a previous parked fixture.
2. Unpark a previous parked DMX channel.
3. Unpark preset type attributes of the current fixture selection.
Example 1
Let´s assume you will unpark the previous parked fixture 1.
There are two ways to do this:
a) Press and hold + small Go+ (=Unpark) and tap at fixture 1 in the fixtures view.
b) Press and hold + small Go+ (=Unpark) Fixture 1 Please.
Fixture 1 is unparked.
Example 2
Let´s assume you will unpark the previous parked DMX channel 1.34.
There are two ways to do this:
a) Press and hold + small Go+ (=Unpark) and tap at the DMX channel 1.34 in the DMX view.
b) Press and hold + small Go+ (=Unpark) DMX 1 . 3 4 Please.
DMX channel 1.34 is unparked.
Example 3
Let´s assume you will unpark the previous parked dimmer attributes of the current fixture selection.
There are two ways to do this:
a) Press and hold + small Go+ (=Unpark) and tap Dimmer in the preset type bar.
b) Press and hold + small Go+ (=Unpark) + Preset and enter in the command line the word Dimmer. Tap Enter.
The previous parked dimmer attributes of the current fixture selection is unparked.