Version 1.9

Update Command

This page describes the syntax and how to use the update command.

To go the update command, press Update on the console.

Description

With the update command, you can update

Update

Let´s assume, you edited a group 1 by using the edit command, and now you will apply the changes to group 1.

An indicator that the update function is available is the flashing Update key on the console.

Press Update Please.

The console asks, if you want to update Group 1. Tap Ok.
Group 1 is updated.

Let´s assume, you edited preset 1 by using the edit command, and now you will apply the changes to preset 1.

Press Update Please.

The console asks, if you want to update Preset 1. Tap Ok.
Preset 1 is updated.

Let´s assume, you have some values in the programmer and you will update preset 1 to these values.

There are two ways to do this:

a) Press Update and tap at preset 1 in the preset pools view.

b) Press Update Preset 1 Please.

Preset 1 is updated with the values in the programmer.

After an update, the fixtures sheet view displays the name of the preset.
To see the values stored in the preset, tap and hold the preset tile.

Let´s assume, you will update cue 2 on executor 2 with the values in the programmer.

There are three ways to do this:

a) Press Update 2 (=Cue 2) Exec 2 Please.

b) Press Update 2 (=Cue 2) and press executor button 2 .

c) Press Update 2 (=Cue 2) and tap at executor 2 in the executor bar window.

If cue 2 on executor 2 is your current active cue, press Update and the executor button 2

Cue 2 of executor 2 is updated with the values in the programmer.