Top Command
This page describes the syntax and how to use the top command.
To go to the top command, press and hold 
and Flash on the console.
Description
With the top command you can jump to the top of a cue list from an executor
- directly
- with fade time
The first cue of the cue list will be executed.
The top command is basically a Goto command.
Syntax
1. Jump directly to the top of a cue list from an executor.
2. Jump with fade time to the top of a cue list from an executor.
Example 1
Let´s assume you will jump directly to the top of a cue list from the executor 1.
If the fader is at 0 % you get no dimmer output.
There are three ways to do this:
a) Press + Flash (=Top) and the respective executor button 
.
b) Press + Flash (=Top) Exec 1 Please.
c) Press + Flash (=Top) and tap on the respective executor in the executor bar view.
The first cue of the cue list will be executed.
Example 2
Let´s assume you will jump to the top of a cue list from executor 1 with the fade time of 3 seconds.
Press + Flash (=Top) Exec 1 Time (=Fade) 3 Please.
The first cue of the cue list will be executed with a fade time of 3 seconds.